Shopping Cart

No products in the cart.

KTM 1190 EDS Shock Service 2014

Pound sterling (£) - GBP
  • Pound sterling (£) - GBP
  • Euro (€) - EUR
  • United States dollar ($) - USD
  • Czech koruna (Kč) - CZK
  • Danish krone (kr.) - DKK
  • Swedish krona (kr) - SEK
  • Norwegian krone (kr) - NOK
  • Hungarian forint (Ft) - HUF
  • Polish złoty (zł) - PLN

£145.00 excl. VAT

rear shock service EDS PDS2

Average turnaround at the moment: 5-7 work days
(updated 05.07.2024)

KTM EDS SHOCK SERVICE

Brand: WP , 46mm piston, PDS2 anti bottoming, Internal floating piston,electronically controlled rebound damping ,hydraulic spring preload 10mm

Our service is simple – you send us your loose shock absorber, we refurbish it to the very highest standard the same way as it was assembled in the factory.

We don’t drill additional ports or cut and solder the cables  KTM EDS or manual  shocks will look the same way as they are supply new.

Then we  return it to you with DPD24 extended liability on a next-day service after the repair .

Our service includes:

  • Disassembly of shock absorber including all internal parts
  • Inspection of all parts for wear or damage
  • Inspection of piston rod for straightness ,damage and polish
  • Strip and thorough clean of piston assemblies
  • Replace all oil seals, dust seals, O-rings and bushes
  • Replace piston wear band with OEM or LOW FRICTION PISTON BUSH (look for additional extras)
  • Rebuild shock absorber with high quality  factory grade shock oil
  • Charge with Nitrogen
  • EDS  functionality is checked after the service
  • Shock is tested on the shock dyno connected to the EDS   controller in different settings

When sending us your shock absorber, remember the following:

  • Prices quoted are for a single shock absorber and include VAT. Our twin shock service is twice the cost
  • Please ensure you include a note with your full name, telephone number, email address, make/model/year of bike and a list of the services required
  • Download the service form and include in the box
  • Make sure that the shock is reasonably clean before they are packed up, to avoid any additional cleaning charges
  • Our standard service does not include the cost of top/bottom bushes/bearings, we cover the hydraulic element of the shock only
  • Common problems with EDS shocks : piston rod damage over 50K miles ,water damage to the stepper motors ,spring corrosion,seized rebound needle, lower needle bearing corrosion.
  • Anything over and above the aforementioned will be charged at the rate as per the optional extras on our website
  • Powder coated or new springs to rider weight are available please ask for the specific model fitment.
Brand

Damping adjustment

Model

, ,

Position

Year

Length Change (mm)